UNBOX AND SET UP - YOUR GUIDE TO NEW SHOWER UNIT INSTALLATION

Unbox And Set Up - Your Guide To New Shower Unit Installation

Unbox And Set Up - Your Guide To New Shower Unit Installation

Blog Article

Book Your Installation



Everybody has their own theory involving How to Install a Freestand.


How to Install a Freestanding Shower Unit
A successful shower installation requires mindful planning and a great deal of work. In many cases, you will need to do three sorts of tasks: framing wall surfaces, setting up the plumbing, and completing walls.

Prep work


Firstly, you have to pick the kind of shower that you desire to install. It is necessary to identify whether the chosen shower can coping with certain systems and also can regulate a risk-free degree of water through the central heating boiler. Most shower systems nowadays are developed to be adaptable to different water pressures (such as stored hot water and also cold mains).
It is likewise important to take into consideration the water stress as well as the preparation of the piping as well as water drainage for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be attached to the bath faucet as per your demand, and also the water temperature can be changed using the taps. Push-on mixers are cheap as well as incredibly basic to install. Nevertheless, although the tube link is simple, it is quickly displaced. Additionally, it is inconvenient to adjust the temperature level.

  • Bath/Shower Mixer: The tube and also spray of this type of shower are integrated with a bathroom mixer faucet, and also the temperature level can be adjusted with the bathroom faucets. It is a very low-cost alternative and no additional plumbing is included. Nonetheless, the bath/shower mixers additionally struggle with troublesome temperature level control choices.

  • Guidebook Mixer: The pipe and spray of a hand-operated mixer shower system belong of the wall surface unit and also the cold and hot water supplies are attached to a solitary shutoff The temperature and pressure of the water are managed with either one or a selection of knobs (in a lot more expensive showers). Although temperature control is much easier in manual mixer kinds, they are much more costly than the previously pointed out mixers. They likewise need extra plumbing of cold and hot water supply pipes.

  • Thermostatic Mixer: The hose pipe as well as spray of this shower type belong of the wall surface device and also the cold and hot water supplies are attached to a single valve here as well. It is full with a built-in stabiliser to self-adjust the water temperature level and also to prevent it from ending up being as well warm. Among the most significant advantages of a thermostatic mixer shower type includes practical temperature control. However, it is the most expensive of the various mixer options.

  • Power Shower: A power shower is a single unit containing a powerful electric pump that is capable of altering both the water pressure as well as temperature. This kind of shower can be fitted if there is water from a cold water tank and also a warm water cyndrical tube. A power shower makes the change of both stress as well as temperature simple. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is provided by a mix central heating boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply and it warms the water electrically. It is important to keep in mind that for this shower type to be installed, the keys stress needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The system allows the temperature level as well as pressure to be adjusted via a handle. Designs with temperature stabilisers are much better as they stay unaffected by various other faucets somewhere else in use within the house. A major downside of electric showers is that the control handle only enables the option of high temperatures at much less pressure, or reduced temperatures at a greater pressure. This is bothersome in the winter season when the spray is frequently weak and also the keys water is colder. Nevertheless, this trouble is tackled in some designs which are readily available with a winter/summer setting.


  • Technique


    Depending on the type of shower you want to mount, the shower head should either be suited order to avoid its contact with the water in the bathroom listed below or the base tray, or it should have a check shutoff.
    Before starting, it is suggested to mark the positions of the shower head as well as control, and to intend the pipe-work involved. In addition, the drainage system to eliminate the waste water will require to be prepared. Both placements of the cable television course and the shower button will likewise require to be considered if an immediate or electrical shower system is being mounted.
    Use the direction overview offered with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to remove the water supply. In order to safeguard the pipelines, they should be provided a water-proof covering and also fitted with separating shutoffs. The pipes can then be hidden right into the wall as well as smudged over to neaten the overall look.
    Fit the base tray, shower head, and fittings.
    Attach the major shower control to the pipelines that will certainly be supplying the water (This may call for a women screw thread adapter).
    Reconnect the supply of water as well as examination the pipelines for any leaks, as some might require firm.
    If you are installing an electrical shower, keep in mind to turn off the power supply prior to making any kind of electric connections. Once these connections have actually been made (there need to be advice within the instruction manual), the power supply can be switched back on.

    Changing Water Pressure to Fit Your Shower


    The cold water storage tank can be raised to a better elevation (sometimes as little as 150mm (6inches)) by fitting a strong wooden support underneath it - potentially made up of struts as well as blockboards. If you pick this alternative, the major and circulation pipes will also have to be raised to satisfy the new elevation of the tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be attached right into the power supply in order to run.

    Piping as well as Drain


    It is best to utilize 15mm size supply pipes, as well as make the runs to the shower as short and straight as feasible so as to maintain maximum pressure and minimise heat loss. Furthermore, by minimising using arm joints for pipeline edges, you can lower the resistance in the circulation of the water. You can attain this by flexing the pipelines rather.

    Most Common Mistakes


  • Violating or ignoring local code restrictions.

  • Utilizing pipelines that are also tiny.

  • Affixing copper to galvanized without making use of a brass or dielectric suitable in between both.

  • Not utilizing tape or pipe compound at threaded joints.

  • Not leveling your fixtures when mounting them.

  • Not mounting an air void filling up for fixtures.

  • Cutting supply stub outs as well short to set up the shutoff valves onto after the completed wall is in location.

  • Not correctly lining up tubes into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will cause a leak.).

  • When turning the water back on in your home, constantly run the outdoors tube shutoff or flush your toilets to hemorrhage dust as well as air from the lines. This debris can create troubles in your sink faucets and other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a One-Piece Shower Unit

    Hopefully you liked our part on How to Install a Freestand. Many thanks for spending some time to read through our short article. I beg you take the opportunity to share this page if you enjoyed reading it. Thank you so much for taking the time to read it.




    Request Estimate


    Report this page